Dongcheng(DCดีจริง) DJG04-355S แท่นตัดไฟเบอร์ 14" 2200W

  • แท่นตัดไฟเบอร์ 14 นิ้ว
1594

ขายแล้ว 6 รายการ
สั่งซื้อล่าสุดเมื่อ 15 ก.ค. 2565
฿6,110.00
-10.00%
฿5,499.00
0.55 กิโลกรัม
9.00 x 29.00 x 10.00 เซนติเมตร
รับประกัน 1 ปี

ระยะเวลา 2-6 วันทำการ

ผ่อนชำระจ่ายดอกเบี้ย
บัตรเครดิตผ่อนชำระกรุงศรีอยุธยา
0.72 %
เริ่มต้น 607.18 .-
3 - 10 เดือน
บัตรเครดิตผ่อนชำระกสิกรุงศรีเฟิร์สช้อยส์
1.16 %
เริ่มต้น 632.10 .-
3 - 10 เดือน
บัตรเครดิตผ่อนชำระกรุงไทย
0.74 %
เริ่มต้น 608.31 .-
3 - 10 เดือน
บัตรเครดิตผ่อนชำระ SCB
0.84 %
เริ่มต้น 613.97 .-
3 - 10 เดือน
  • สินค้าของแท้ มีประกัน 100%
  • ส่งสินค้าฟรี เมื่อสั่งซื้อสินค้า 899.- ขึ้นไป
  • สินค้ามีปัญหา สามารถคืนสินค้าภายใน 7 วันทำการ

คุณสมบัติ

SPECIFICATIONS

Rated Power Input 2200 W
No-Load Speed 3800 r/min
Max. Cutting Angle 45°
Max. Diameter for Cutting Discs 240 mm
Wheel Size External Diameter 355 mm
Thickness 3 mm
Internal Diameter 25.4 mm
Max. Cutting Capacity Pipe 115 mm
Profiled Bar 115 mm × 130 mm
Net Weight 15.6 KG

 

※ Due to continuing program of research and development, the specifications herein are subject to change without prior notice.

 

ADDITIONAL SAFETY RULES

1. This Cut-off machine should only be placed on the ground for operation, never try to mount it on a table.

2. Use only wheels with maximum operating speed at least as high as "No-Load Speed" indicated on the machine nameplate. Be sure to use only fiberglass-reinforced wheels.

3. Make a revolving strength test if the wheel retention life is over one year, and qualified before use.

4. Check the wheel carefully for cracks or damage before operation. Replace cracked or damaged wheel immediately.

5. Use wheel of which linear speed is no less than 80m/s.

6. Install the wheel according to the instruction. If the wheel installed too loose there may be dangerous, but if too tight, it may be damaged.

7. Make sure that the workpiece is securely clamped before cutting, and control the feed speed according to the size, material or diameter of the workpiece. Use a non-flammable block to support the end of the workpiece when it is too long.

8.Remove material or debris from the area that might be ignited by sparks. Be sure that others are not in the path of the sparks.

9. Never operate this cut-off machine without guards in place.

10. There is a impact force when switching on the tool. Thus, depress the tool with your right hand, while switching on it with left hand.

11. Run the tool at no load for a while before operation. Start working after making sure there is no abmormal phenomenon and the tool attains full speed.

12. Keep the side surface of the  wheel free of the impact force, or the wheel may be cracked or damaged.

13. When cutting with a new wheel, do not press the handle down to the bottom. That will cause the wheel cut into the ground. Do not press the handle down more once the workpiece is cut off.

14. Keep your hand far away from the revolving whell. Always switch off and wait for the wheel to come to a complete stop before moving workpiece or changing settings.

15. Use the cutting edge of the wheel only. Never use side surface.

16. Wear hearing protection during extended periods of operation, also wear safety glasses.

17. Be careful not to damage the spindle, flanges (especially the installing surface) or bolt. Damage to these parts could result in wheel breakage.

18. This cut-off machine is designed only for dry cutting; do not use any cooling fluid in cutting operation. Wet or damp may weaken the intensity of the wheel and invite dangerous.

19. Do not touch the workpiece immediately after operation; it may be extremely hot and could burn your skin.

20. This machine should be properly earthed when in use. Be sure to use an eart-leakage circuit breaker, with actuating current not more than 30mA and actuating time not more than 0.1s, if wok area is too hot and wet or poisoned by electric dust.

21. Do not use the tool with damaged cord. If the cord is damaged, do not touch it and unplug it immediately, or there will be the danger of electric shock.

SAVE THESE INSTRUCTIONS.

WARNING! MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

Edition 2 Apr., 2020

ข้อมูลสินค้า

Dongcheng(DCดีจริง) DJG04-355S แท่นตัดไฟเบอร์ 14

ประเภทสินค้า : แท่นตัดไฟเบอร์

ยี่ห้อ : Dongcheng (DCดีจริง)

รุ่น : DJG04-355S

ข้อมูลเทคนิค

  • กำลังไฟเข้า (วัตต์) : 2,200W.
  • ขนาดใบตัด (มม.) : 355 x 3 x 25.4 มม.
  • ความเร็วรอบเปล่า (รอบ/นาที) : 3,800 รอบ/นาที
  • ความสามารถในการตัด สูงสุด  : ท่อ : Φ 115 มม.
  • Profiled Bar : Φ 115x130 มม.
  • มุมตัดองศา : 0~45°
  • น้ำหนัก (กก.) : 15.6 กก.

คุณสมบัติ

  1. พลังงานสูง 2,200 วัตต์
  2. ตัวเรือนอลูมิเนียม
  3. การออกแบบฐานที่หนาและกว้างขึ้น
  4. มุมตัดตุ้มปี่ 4.0-45°
  5. การออกแบบเกียร์เสริม

#SKIศูนย์รวมเครื่องมือช่างออนไลน์

#SKIครบจบทุกความต้องการด้านเครื่องมือช่าง

#DongChengตงเฉิง

#DCดีจริง

#DongChengPowertoolsno1

#ตงเฉิงโดยSKI

สินค้าที่เกี่ยวข้อง

หน้าแรก โปรโมชั่น หมวดหมู่สินค้า
Facebook Messenger
Line